NEPKG is a full service, full line distributor of the best packaging equipment and supply manufacturers.
Loading

LABEL DISPENSERS

TACH-IT SEMI-AUTOMATIC LABEL DISPENSERS FOR LABELS UP TO 8 INCHES WIDE
       
 

Tach-It SH400 Label Dispenser

 
 
Tach-It SH400 Label Dispenser
     
  Tach-It SH400 Label Dispenser
The Tach-It SH400 ultra-economical pressure sensitive label dispenser is perfect for labels up to 6 inch wide. Easy to adjust and requiring no tools, the specially designed extra sensitive micro-switch senses the edge of the label as it is fed and stops the motor exactly at the same point each cycle.
Length – 12", Width – 10.5", Height - 10", Weight - 12 LBS Label Size: Minimum - 3/8" Width X 5/8” Length, Maximum - 6" Width X 9" Length Label Roll Diameter: 12" Speed: 240 inches per minute Power: 110 Volt
 
     
 
       

       
 

Tach-It SH402TR Label Dispenser

 
 
Tach-It SH402TR Label Dispenser
     
  Tach-It SH402TR Label Dispenser
Designed for assembly, electronic, manufacturing, and anywhere small labels are used, our Tach-It model SH-402TR is designed specifically for miniature die-cut and butt-cut labels of any shape. Usable inch either a vertical or horizontal position, the SH-402TR utilizes state-of-the art electronics and an optical reader which allow it to work on either transparent or opaque labels.
length - 7 1/2 in., width - 5 1/2 in., height - 7 1/4 in., weight - 6 lbs. label size: minimum - 13/64 in. x 25/64 in. , maximum - 2 in. x 5 in. label roll dia.: 6 in. Speed: 120 inches per minut power: 110 volt Speed: 120 inches per minute
 
     
 
       

       
 

Tach-It SH404TR Label Dispenser

 
 
Tach-It SH404TR Label Dispenser
     
  Tach-It SH404TR Label Dispenser
Our premium label dispenser, the Tach-It model SH-404 peels, releases and advances all types of butt-cut and die-cut labels either opaque or transparent on rolls or fan-folded. Operation of this machine is simple, when an operator removes one label the next one is automatically dispensed. Designed using optical-reader reliability, the Tach-It SH-404TR can feed all labels whether they are large or small, opaque or transparent.
length - 14 in., width - 10 in., height - 11 in., weight - 13 lbs. label size: minimum - 3/8 in. x 5/8 in. , maximum - 6 in. x 14 in. label roll dia.: 9 1/4 in.>power: 110 volt Speed: 240 inches per minute
 
     
 
       

       
 

Tach-It KL Series Label Dispenser

 
 
Tach-It KL Series Label Dispenser
     
  Tach-It KL Series Label Dispenser
Consisting of the KL-100 (for labels up to 4½ inch wide) and the KL-150 (for labels up to 6 inch wide), Tach-It KL series of pressure sensitive label dispensers is ideal for all types of roll or fan-folded labels. An economical alternative to our SH-404 the KL series utilizes photo-sensor reliability so that there are no micro-switches or hair triggers to adjust.
KL-100 length - 12 in., width - 11 in., height - 8 in., weight - 12 lbs. KL-150 length - 12 in., width - 13 in., height - 8 in., weight - 13 lbs. label size: minimum - 3/8 in. x 5/8 in. , maximum - 6 in. x 14 in. label roll dia.: 9 in. Speed: 240 inches per minute power: 110 volt Speed: 240 inches per minute
 
     
 
       

       
 

Tach-It 6500 Label Dispenser

 
 
Tach-It 6500 Label Dispenser
     
  Tach-It 6500 Label Dispenser
Create an L-Clip type of seal with pressure sensitive labels or clear wafer seals Ideal for pharmaceutical - medical & food packaging Works with all types of die-cut labels and wafer seals As operator pushes box over rollers and applies the seal - the next label is automatically positioned Power 110 volt AC with 0.5A fuse (220 volt available)
 
     
 
       

       
 

Tach-It Mini Con Label Applicator

 
 
Tach-It Mini Con Label Applicator
     
  Tach-It Mini Con Label Applicator
Realizing a need in the market for a machine between a semi-automatic label dispenser and a full inline labeling system, Tach-It created a table top unit that will feed product on a conveyor through a wipe on label applicator and apply a label precisely on the desired location each time. The mini-con requires no special operator training or tools for label or product changeovers, has a touch sensitive display screen where all settings are made and viewed.
Machine length—57in. (145 cm) Conveyor width—10.5in. (270mm) Max. width—5in. (130mm) Machine width—18in. (47 cm) Conveyor length—39.4in. (1 meter) Max. length—11in. (280mm) Machine height—36in. (93cm) min. width—3/8in. (10mm) min. length—5/8in. (20mm) label speed: Max. speed—59 ft. per minute (18 meters) min. speed—46 ft. per minute (14 meters) power—110 VAC
 
     
 
       






     
 

 
 
NEPKG LEASING PROGRAM
MDA Integrity Leasing ProgramIf your budget doesn't allow you to purchase new equipment, financing your new shrink wrapper or stretch wrapper is a quick and sure way to increase your cash flow.
   
 
Water activated tape dispensers
 
Better Pack has been the leader in design and manufacturing of WAT tape dispensers. Designed for Increasing Productivity / Reducing Amount of Tape Used / Durability there is a Better Pack tape dispenser to meet your needs.
 
   
 
Paper water activate tapes
 
Better Pack has been the leader in design and manufacturing of WAT tape dispensers. Designed for Increasing Productivity / Reducing Amount of Tape Used / Durability there is a Better Pack tape dispenser to meet your needs.
 
 
Tac-It Mini Con Label Applicator
 
Realizing a need in the market for a machine between a semi-automatic label dispenser and a full inline labeling system, Tach-It created a table top unit that will feed product on a conveyor through a wipe on label applicator and apply a label precisely on the desired location each time.